Standard Features

  • Smooth steel exterior sides and roof
  • Single swing door grip handle and emergency hardware
  • Automatic pressure relief valve, (1) each for air transport
  • Stainless Steel interior lining as per NSF Standards
  • Heavy duty tread plate aluminum floor
  • Four way fork lift pockets
  • Thermo King VM405 Refrigeration Unit, 208/230 VAC, 3 phase, 50/60 Hz power
  • Internal lighting, 120 VAC, 100 watt bulb
  • Cargo restraint system with (12) tie down points, 1,000 lbs. cap.
  • Horizontal E-Track, (1) row per side, recessed into side wall panel
  • Floor drain, (4) each with plugs
  • Air curtains in sliding track across door
  • Five (5) folding steps/hand hold for roof access, plus (1) on the roof
  • Custom data plates
  • Vertical E-Track in road side wall
  • Vertical E-Track in curb side wall
  • TRCS Shelf Kit (SB531.0.SFRS-SK3)
  • 19” wide, 600 lbs. cap. per shelf, (5) shelves per side, (10) total
  • 31-day recording thermostat
  • Clip-On Generator Set (run 3 Tricons at once)
  • Spare parts kit
  • Low Solar Absorption (LSA) coating
  • Connecting couplers, (3) per Tricon
  • Connecting coupler storage bracket, (1) each holds (3) connectors
  • Twelve (12) rivnuts each, located on interior of secondary door
  • Switched 2DA receptacle
  • Technical Manual Holder, (2) each, interior size: 12” x 9” x 1.5”
  • Low Solar Absorption (LSA) coating
  • Available in Green, Tan or White exterior paint
  • HEAT LEAKAGE = U MAX @ 20°C MEAN TEMP: 7.59 Kcal/hr ° C

Optional Features

  • Food grade stainless steel shelving, removable open deck design

Container Specs

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

Length Height Width Door Opening
Exterior Interior Exterior Interior Exterior Interior Height Width
Ft in 6’ 5 1/2” 5’ 9 9/32” 8’ 0” 6’ 11 11/16” 8’ 0” 7’ 1/8” 6’ 3” 2’ 4”
Metric 1,969 1,760 2,438 2,126 2,438 2,438 1,905 711
TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY
Lbs 4,125 20,325 24,450 293 cu. ft. /270 cu. ft.
Kgs 1,871 9,219 11,090 8.3 cu. m. /7.63 cu. m.

ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS