Standard Features

  • Corrugated steel sides, roof, and swing doors on both sides
  • Four-way fork lift pockets
  • Back-to-back heavy-duty steel cabinets with (6) drawers each
  • Wall tie down steel lashing rings, 2,000 lbs. capacity (20 total)
  • Adjustable shelving A-track (4) sets:
  • (10) vertical A-track sections (5 per side)
  • (2) Full size shelving system provides (4) each transverse shelf halves, with non-slip polyurea surface coating with 16 shelf brackets
  • (8) each recessed tie down bars per shelf half
  • Each full size shelving system is rated at 550 lbs. capacity
  • (2) each shoring and decking beams
  • (32) each web straps with ratchets 48” L x 1” W, 700 lbs. SWL
  • (4) each caster wheels, (2) swivel, and (2) fixed
  • 3,000 lbs. working load each, 12,000 lbs. capacity total
  • All equipped with brakes and twist locks
  • (2) each caster wheel storage brackets, holds (2) casters each
  • (4) each container coupler (Horizontal Twistlocks)
  • (2) each container coupler storage bracket, hold (2) couplers each
  • (2) vents (one per door panel)
  • OD Green #34088 exterior, Sea Foam Green #24533 interior paint
  • Quadcon containers are manufactured to ISO standards for 9 high stacking
  • Dry freight container, all Corten Steel Monocoque construction
  • Conforming to ISO 668 + 1496 CSC Certified
  • 9” diameter wheel, 1/2” thick Polyurethane band

Optional Features

  • Additional Transverse Shelf Halves with 1 set of 4 shelf brackets
  • Additional Shoring and Decking beams
  • Additional Web Straps with ratchets
  • Tow Bar

Container Specs

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

Length Height Width Door Opening
Exterior Interior Exterior Interior Exterior Interior Height Width
Ft in 4’ 9 3/8” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”
Metric 1,457 1,417 2,083 1,907 2,438 2,438 1,808 1,362
TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY
Lbs 2,000 9,200 11,200 220 Cu. Ft.
Kgs 907 4,173 5,080 6.22 Cu. M.

ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS